Hourglass

For the hourglass in Wizard of Oz we were looking for something interesting, a little creepy, but most importantly plastic.

Apparently the last time they did the show they had a beautiful glass hourglass that shattered all over some poor little girl in the front row during one of the performances. There were no injuries, but it was certainly not something we wanted a chance to repeat.

I found these two purple plastic bottles in the floral section at Michaels. They were simple little spray bottles, they came in multiple shapes and colors and were only $1 each.

I filled the bottles with colored sand. I started with red sand and it was far too dark, it was almost invisible inside the dark plastic bottles, I switched to white and it worked much better.

I created a cap inside the mouth of one of the bottles using epoxy putty and slowly adjusted it until I got the right speed and amount of sand flowing through it. Once the inside piece was adjusted I attached the two bottles together using more epoxy putty making sure to get a good seal (the last thing I want is sand leaking out all over the place).

For the stand, I started with two basic plywood circles and three pieces of dowel. I had been hoping to find some bats or gargoyle-ish figurines to use on the corners, but was coming up empty after visiting multiple Halloween and toy stores.

For plan B, I bought a few packages of sculpy bakable clay

and made a set of snaky twisty pieces. I collaged them onto the corners.

I painted the whole thing a tarnished antique gold.

The piece turned out looking pretty good, and more importantly, sturdy.

Cyclone!

I wish this cyclone was my idea, but it's a re-creation of the one that was built the last time the theatre did a production of this "Wizard of Oz." It's so cool though I had to share the idea.

It starts with a cone sewn out of a light-weight sheer fabric (I bought this grey georgette on sale at JoAnns). It has a pocket sewn into the top that I threaded a piece of flexible copper tubing into.

I built this cross-piece to match the circle at the top of my cone.

The copper tube screws onto the spokes and the dowel in the center fits inside the end of a large piece of PVC.

The cross piece slips easily in and out of the dowel for easy storage and assembly backstage.

In it's finished state the actor holds the 7' tall piece at the bottom and slowly guides it in small circles  The top and the bottom of the cone are much more secure but the center of the cone is free to move and swirl in a very cyclone-ish manner. 

The effect is very cool and I'm sure will be even more magical under stage lights.  

*Note- Sorry about the sideways video, I couldn't figure out a way to rotate it without reloading it. 

cuckoo clocks

It's funny how the same props seem to show up in multiple shows at the same time. I just did two shows that had large amounts of sand onstage. I hadn't used old wooden crates in months and now I have three shows at once that need them. And now I needed two cuckoo clocks for two shows with the same director. 

The clocks are completely different of course. The first clock is for the Wizard of Oz. It is supposed to be balanced on the headboard of Dorothy's bed and then it falls and hits her to knock her out during the tornado. 

We of course couldn't use a real cuckoo clock, if we really knocked Dorothy out it would be a short show. The director asked if I could build a clock out of foam. 

I bought some foamies from the craft store and set to building. I used this as my research image.

I used 1/4" thick foam for the base frame of the house.

I used 1/8" foam for everything else (it comes in many more color options)

Everything was attached with hot glue.

And then I coated the entire piece with some watered down elmers glue, tinted with a little bit of brown paint.

And glue in a Styrofoam birdie to top it all off.

The second clock I needed was for It's a Wonderful Life- The Radio Play. I rented a clock from an antique store and the man there carefully wrapped the clock in layers of newspaper and bubble wrap. Unfortunaely neither he or I knew how a cuckoo clock should be packed and when I went to take the clock out I discovered that the chains had come off of the cogs on the inside of the clock and the stress of sitting on it's back had ripped the fragile paper of the bellows (the little paper accordion-type things that push the air through the whistles and makes the cuckoo sound)

I had the luckiest night ever though. I looked up clock repair on google maps. I found the phone number of a repairman about 5 miles away. I called and he told me to come right over. I got to his house at 6pm, he reattached the chains, replaced the bellows, and oiled and tightened everything. I picked the clock back up at 10 pm and he charged me the cost of parts and a pair of tickets to the show. 

The clock looks beautiful, and it sounds fantastic!

Another Magic Wand

This magic wand is for Glinda in the Wizard of Oz.
The director wanted it to be larger, almost like a baton, but still magical, and sparkly.

I used this wand as my inspiration.

For the base of the wand I bought a short, thin copper tube from Home Depot.
I added a plastic prism I bought at the craft store to the end and secured it with epoxy putty.

After securing the stone I wired up the circuit. I used a 3V watch battery, a small toggle switch and a large LED bulb. I made sure I had long leads on the wires to and from the bulb so that the switch and battery could be on the bottom of the wand and the bulb could go as far up the tube as possible. When I flip the switch, the LED lights up the entire prism and the the glow looks almost magical, because you can't see the light source. 

To get the natural vine look on the outside I used layers of hot glue.

And I used a large amount of hot glue at the end to secure my switch and to help hide the switch and battery.

After that I painted the entire thing gold and added some more rhinestones (because who doesn't want more sparkle)

Here's the full finished wand, I know I would have wanted one when I was ten.